维护铸铜雕塑4大技巧

铸铜雕塑就是拿铜铸造而成的各式各样的雕塑作品，在我们的生活中还是很常见的，那么在经过风吹日晒之后为何这些雕塑还是那么的光鲜亮丽呢？其实维护雕塑有四大技巧，下面城市雕塑厂家就带大家去了解一下！

Cast copper sculptures are all kinds of sculptures made of copper, which are still very common in our life. Then why are these sculptures so bright after the wind and sun? In fact, there are four skills to maintain sculpture. The following urban sculpture manufacturers will take you to understand!

1.周围环境：保持铸铜雕塑最重要的第一步是环境。有必要保持干燥的环境，没有灰尘和空气污染物！温室的温度优选控制在18℃-24℃，湿度为40％。-50％。

1. Surrounding environment: the most important first step to maintain the cast copper sculpture is the environment. It is necessary to keep a dry environment free of dust and air pollutants! The temperature of the greenhouse is preferably controlled at 18 ℃ - 24 ℃ and the humidity is 40%- 50％。

2.防护：清洁或维护铸铜雕塑时，必须特别注意防止外界的一些有害化学物质，如酸，氯化物等。此外，移动铸铜雕塑时，最好采取隔离措施。不要直接用双手触摸。

2. Protection: when cleaning or maintaining cast copper sculptures, special attention must be paid to prevent some harmful chemicals outside, such as acid, chloride, etc. In addition, when moving the cast copper sculpture, it is best to take isolation measures. Don't touch it directly with both hands.

3.铸铜雕塑的清洁：清洗铸铜雕塑时要小心。一定要用干净柔软的布擦去灰尘。最好是用刷子或吸尘器，在不容易在雕刻槽中擦布的地方吹走灰尘。

3. Cleaning of cast copper sculptures: be careful when cleaning cast copper sculptures. Be sure to wipe off the dust with a clean and soft cloth. It is best to use a brush or vacuum cleaner to blow away the dust where it is not easy to wipe the cloth in the carving groove.

4.抛光：因长时间摆放出现铸铜雕塑出现暗淡的情况，清洁时不能用布大力摩擦。使用棉细布轻轻擦拭铸铜雕塑的表面，达到抛光的效果，也可以保护铸铜雕塑的表面的蜡层。

4. Polishing: cast copper sculptures appear dim due to long-term placement, so it is not allowed to rub vigorously with cloth during cleaning. Use a cotton cloth to gently wipe the surface of the cast copper sculpture to achieve the polishing effect and protect the wax layer on the surface of the cast copper sculpture.